T1155III Pipeline Trencher

  • Vermeer SmartTEC electronic control system monitors real-time machine performance
  • When you encounter tough trench digging conditions, the engine speed drops, increasing the torque for more power to pull through
  • Match the optional sectionalized boom to the job for optimal results, minimal tooth wear and reduced vibrations

General

Manufacturer Vermeer
Model T1155III Pipeline Trencher
Category Pipeline, Renewable Energy
Price Request a Quote
Year 2024

Transport Dimensions

Approach Angle 16deg
Height Range 146" (370.8 cm)
Length with 50" (127 cm) End Idler and 8 ft (2.44 m) Boom 37.3ft (11.4m)
Length with 50" (127 cm) End Idler and 10 ft (3.05 m) Boom 39.8ft (12.1m)
Length with 50" (127 cm) End Idler and 12 ft (3.66 m) Boom 42.3ft (12.9m)
Length with 50" (127 cm) End Idler and 14 ft (4.27 m) Boom (with Restraint Bar) 43ft (13.1m)
Length with 50" (127 cm) End Idler and 16 ft (4.88 m) Boom (with Restraint Bar) 45.3ft (13.8m)
Weight Range 120,000 lb - 170,000 lb (54,431.1 kg - 77,110.7 kg)
Width Ranges 118"-120" (292.1 cm - 304.8 cm)
Make and Model Caterpillar C15 ACERT Tier 3
Gross Horsepower 540hp (402.7kw)
Rated Engine RPM 2100
Number of Cylinders 6
Fuel Tank Capacity 270gal (1022.1L)
Operating Range 9.4
Fuel Consumption at Full Load 28.9gph (109.4lph)
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) 35deg
Air Cleaner Dry-type with precleaner
Aspiration Turbocharged and air-to-air aftercooled
Cooling Medium Liquid
Electrical System 24 Volt DC
Oil Filter Full flow
Make and Model Caterpillar C15 ACERT Tier 4 Final
Gross Horsepower 540hp (402.7kw)
Rated Engine RPM 2100
Number of Cylinders 6
Fuel Tank Capacity 270gal (1022.1L)
Operating Range 9.6
Fuel Consumption at Full Load 28.1gph (106.4lph)
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) 35deg
Air Cleaner Dry-type with precleaner
Aspiration Turbocharged and air-to-air aftercooled
Cooling Medium Liquid
Electrical System 24 Volt DC
Oil Filter Full flow
Auto Self Level No
Ground Pressure Minimum 13psi (89.6kPa)
Ground Pressure Maximum 17.3psi (119.3kPa)
Tilt Track Available No
Track Drive Type Dual path hydrostatic with planetary transmission
Track Length 177.5in (450.9cm)
Track Pad Type Single, double or triple grouser
Track Pad Width Ranges 26" (66 cm), 28"(71.1 cm), 30" (76.2 cm)
Track Size CAT 350 Excavator
Maximum Ground Speed - Low 50ft/min (15.2m/min)
Maximum Ground Speed - High 133ft/min (40.5m/min)
Parking and Emergency Brake spring-applied, hydraulic release, wet disc brake
Service Brakes Hydrostatic
Belt Width 30in (76.2cm)
Conveyor Belt Speed Range 0-1070 fpm
Conveyor Belt Style Cleated or finger type
Conveyor Length 168" or 228" (426.7 or 579.1 cm)
Conveyor Shift Available Yes
Conveyor Shift Distance Range 65" and 125" (165.1 cm and 317.5 cm)
Conveyor Style Curved
Discharge Direction Right or left
Discharge Height Range 72" or 86" (182.9 cm or 218.4 cm)
Trencher Yes
Terrain Leveler Yes
Rockwheel No
Bucket Wheel No
Cab Yes
Control System TEC Plus with SmartTEC
Air Conditioner/Heater Yes
Air Suspension Seat Yes
AM/FM Stereo with Weather Band Yes
Elevating Yes
Pressurized/Filtered Air Yes
Rollover Protective Structure (ROPM) Yes
Oil Tank Capacity 152gal (575.4L)
Oil Type Vermeer HyPower 68 or Vermeer HyPower 100
Pressure Setting 2500psi (172.4bar)
Pump Flow at Maximum RPM 27.9gpm (105.6L/min)
Pump Type pressure-and-flow-compensated (load-sensing)