SC30TX Stump Cutter
- A compact footprint for maneuverability and access
- Designed with ease of maintenance in mind
- Safety-focused design
General
| Manufacturer | Vermeer |
| Model | SC30TX Stump Cutter |
| Category | Landscape, Rental, Tree Care |
| Price | Request a Quote |
| Year | 2024 |
General Dimensions and Weights
| Length | 94in (238.8cm) |
| Width | 35in (88.9cm) |
| Height | 49in (124.5cm) |
| Weight - Engine Option One | 1550lbs (703.1kg) |
Engine - Option one
| Make and Model | Kohler ECH740 |
| Number of Cylinders | 2 |
| Gross Horsepower (Maximum) | 25hp (18.6kw) |
| Torque (Max) | 42ft-lb (56.9Nm) |
| Fuel Tank Capacity | 6.8gal (25.7L) |
| Max Fuel Consumption | 2.4gph (9.1lph) |
| Fuel Type | Gas |
| Air Cleaner | 6 " (15.2 cm) 2-Stage dry |
| Oil Filter | Spin-on |
| Recommended Oil | Kohler oil or API CH4/SJ |
| Oil Volume with Filter | 2qt (1.9L) |
| Maximum Angle of Continuous Operation | 25deg |
| Cooling Medium | Air/oil |
Cutterwheel System
| Cutterwheel Diameter | 16in (40.6cm) |
| Cutterwheel Thickness | .5in (1.3cm) |
| Cutterwheel Speed | 1110rpm |
| Cutterwheel Straight Line Dimension | 35.5in (90.2cm) |
| Cutterwheel Cut Above Ground | 25in (63.5cm) |
| Cutterwheel Cut Below Ground | 12in (30.5cm) |
| Tooth Description | Yellow Jacket Cutter System |
| Number of Teeth | 16 |
| Number of Indexes | 2 |
| Number of Pockets | 16 |
| Reversible Pockets/Teeth | Yes |
| Cutterwheel Guard | Yes |
| Chip Containment | 2.2cu ft (.1cu m) |
Cutterwheel system - Two
| Number of Teeth | 20 |
Cutterwheel Drive Components
| Lower Gearbox | Hydraulic motor |
Hydraulic System
| Tank capacity | 9gal (34.1L) |
| Recommended Oil Type | ISO 68 |
| System Type | Open loop |
| Filtration Method | Inline return filter |
| Pump Flow at Maximum RPM | 16gpm (60.6L/min) |
| System relief pressure | 2750psi (189.6bar) |
| Flow Control | Autosweep (option) |
| Directional Control | Standard |
| Oil Cooler | Yes. Fan-cooled |
Electrical System
| System Voltage | 12 |
| Battery | 405 |
| Standard Gauges | Hour meter/tach |
| Switches | Cutter wheel drive |
| Controller | Yes |
Chassis
| Control Station Description | Fixed-rear |
Track Drive System
| Track Type | Rubber 7 " (17.8 cm) width |
| Track Width - Retracted | 35 " (88.9 cm) |
| Track Width - Extended | 35 " (88.9 cm) |
| Track Length on Ground | 31.4 " (79.7 cm) |
| Type of Idler | Cast |
| Number of Idlers | 5 |
| Track Drive Pump Type | Hydrostatic |
| System Relief Pressure | 2900 psi (200 bar) |
| Pump Flow at Maximum RPM | 11.4 gpm (43.1 L/min) |
| Track Drive Motor Type | Geroter |
| Track Brake Type | Hydrostatic |
| High Speed Travel | 3.2mph (5.1km/h) |
| Ground Bearing Pressure - Soft Ground | 3.4psi (23.4kPa) |
Other Options
| Special Paint | Per request |
| Extended Warranty | Per request |
| Preventive Maintenance | Per request |