Vermeer Equipment Surface Miners T1155III Surface Miner

T1155III Surface Miner

Ideal for large rock excavation applications including surface mining, overburden removal, site preparation and road demolition
The T1155III surface miner is equipped with a Caterpillar® C15 ACERT Tier 3 or Tier 4 Final electronic engine, giving you the power needed to level surfaces on your construction or mining site
Pair this with a top-down cutting system to achieve greater rock penetration
Conduct surface mining extraction, remove ground surface, or create a smooth, level area for construction site preparation

Request a Quote Download Brochure

Approach Angle	16deg
Height Range	146" (370.8 cm)
Length with 40" (101.6 cm) End Idler and 14 ft (4.27 m) Boom (with Restraint Bar)	37.3ft (11.4m)
Length with 50" (127 cm) End Idler and 8 ft (2.44 m) Boom	39.8ft (12.1m)
Length with 50" (127 cm) End Idler and 10 ft (3.05 m) Boom	42.3ft (12.9m)
Length with 50" (127 cm) End Idler and 12 ft (3.66 m) Boom	43ft (13.1m)
Length with 50" (127 cm) End Idler and 14 ft (4.27 m) Boom (with Restraint Bar)	45.3ft (13.8m)
Weight Range	120,000 lb - 170,000 lb (54,431.1 kg - 77,110.7 kg)
Width Ranges	118"-120" (292.1 cm - 304.8 cm)

Make and Model	Caterpillar C15 ACERT Tier 3
Gross Horsepower	540hp (402.7kw)
Rated Engine RPM	2100
Number of Cylinders	6
Fuel Tank Capacity	270gal (1022.1L)
Operating Range	9.4 hours
Fuel Consumption at Full Load	28.9gph (109.4lph)
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles)	35deg
Air Cleaner	Dry-type with pre-cleaner
Aspiration	Turbocharged and air-to-air aftercooled
Cooling Medium	Liquid
Electrical System	24 Volt DC
Oil Filter	Full flow

Make and Model	Caterpillar C15 ACERT Tier 4 Final
Gross Horsepower	540hp (402.7kw)
Rated Engine RPM	2100
Number of Cylinders	6
Fuel Tank Capacity	270gal (1022.1L)
Operating Range	9.6 hours
Fuel Consumption at Full Load	28.1gph (106.4lph)
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles)	35deg
Air Cleaner	Dry-type with pre-cleaner
Aspiration	Turbocharged and air-to-air aftercooled
Cooling Medium	Liquid
Electrical System	24 Volt DC
Oil Filter	Full flow

Auto Self Level	No
Ground Pressure Minimum	13psi (89.6kPa)
Ground Pressure Maximum	17.3psi (119.3kPa)
Tilt Track Available	No
Track Drive Type	Dual path hydrostatic with planetary transmission
Track Length	177.5in (450.9cm)
Track Pad Type	Single, double or triple grouser
Track Pad Width Ranges	26" (66 cm), 28"(71.1 cm), 30" (76.2 cm)
Track Size	CAT 350 Excavator
Maximum Ground Speed - Low	50ft/min (15.2m/min)
Maximum Ground Speed - High	133ft/min (40.5m/min)
Parking and Emergency Brake	spring-applied, hydraulic release, wet disc brake
Service Brakes	Hydrostatic

Belt Width	30in (76.2cm)
Conveyor Belt Speed Range	0-1070 fpm
Conveyor Belt Style	Cleated or finger type
Conveyor Length	168" or 228" (426.7 or 579.1 cm)
Conveyor Shift Available	Yes
Conveyor Shift Distance Range	65" and 125" (165.1 cm and 317.5 cm)
Conveyor Style	Curved
Discharge Direction	Right or left
Discharge Height Range	72" or 86" (182.9 cm or 218.4 cm)

Cab	Yes
Control System	TEC Plus with SmartTEC
Air Conditioner/Heater	Yes
Air Suspension Seat	Yes
AM/FM Stereo with Weather Band	Yes
Elevating	Yes
Pressurized/Filtered Air	Yes
Rollover Protective Structure (ROPM)	Yes

Oil Tank Capacity	152gal (575.4L)
Oil Type	Vermeer HyPower 68 or Vermeer HyPower 100
Pressure Setting	2500psi (172.4bar)
Pump Flow at Maximum RPM	27.9gpm (105.6L/min)
Pump Type	pressure-and-flow-compensated (load-sensing)

Fleet-enabled Surface Miners	Download
T1155III Spec Sheet	Download
Mining Capabilities Guide	Download